Use Of Shoulder Belt Positioning Clip - Nuna AACE Manual

Use of Shoulder Belt Positioning Clip

1
- The Shoulder Belt Positioning Clip must be
attached to the horizontal bar located on either
side of the booster seat bottom.
2
- The Shoulder Belt Positioning Clip can be installed
on either side of the booster to achieve the best fit
for your child in your vehicle.
3
- Insert the loop end of the strap around the
horizontal bar on the back of the booster.
4
- Pass the Shoulder Belt Positioning Clip through
the loop
5
- Pull up on the strap.
6
- It is important for the Vehicle Shoulder Belt to
fall within the blue zone, shown in illustration.
32 AACE instructions
1
2
3
4
5
6
AACE instructions 33