Advertisement
Advertisement
Table of Contents
Summary of Contents for Rollo rollo
- Page 1 Logistics Label Printer USER GUIDE...
- Page 3 Rollo is a very capable printer. You can create barcodes, shipping labels, name badges, and labels of all sizes. Please take a few short moments to review the How-To Video. It will guide you to setup Rollo in a way that best fits your needs.
- Page 4 Congratulations on your purchase of Rollo. Rollo is engineered for real-time and batch label printing to streamline your shipping process. Rollo is a thermal printer and does not require any ink or toner. Prints will be made by instantly heating compatible labels.
-
Page 5: Quick Start
QUICK START 1. Ensure the 2. Connect the printer is OFF power cable 3. Connect the USB cable 4. Turn the power ON Continue to Driver Installation... -
Page 6: Driver Installation
DRIVER INSTALLATION LATEST DRIVER For the latest driver, please visit www.RolloPrinter.com/driver Please run the downloaded software from the web address indicated above and follow the prompt to complete installation. » Windows » Mac... - Page 7 WINDOWS SETUP PRINTING 1. Open Your Printer Page In your control panel, open the printer page, and right click on your newly installed printer “Rollo Printer” and choose “Printing Preferences.” 2. Go to the Advanced Setting Click on the “Advanced...” button.
- Page 8 2. Select Software Highlight Thermal Printer and choose “Select Software” under “Use” drop-down menu. Search for Rollo Printer and click on Ok / Add. 3. Set the Paper Size When printing your file, please ensure “Paper Size” is set correctly for your label.
-
Page 9: Label Setup
LABEL SETUP Rollo is capable of working with many labels. Your printer needs to learn your label properties prior to its first use. To initiate automatic label identification, please follow these steps: 1. Turn the printer 2. Press the side release button to open the cover 3. - Page 10 LABEL SETUP 4. Carefully close 5. Turn the power ON and the cover. wait 5 seconds until the printer is initialized. 6. Press and hold the 7. Rollo will start automatic feeder button until label identification. you hear one beep.
-
Page 11: Maintenance
MAINTENANCE Printer Head Cleaning Steps: Turn the printer off, remove the power cord, and open the cover. Wait until the printer head cools down. The printer head can be very hot after printing. Completely clean printer head using an alcohol swap (not water). - Page 12 Allow the area to dry off before turning the printer on. Insert Rollo into the same USB port on your computer every time. This will avoid creating duplicate copies of the printer in your operating...
-
Page 13: Led Status
LED STATUS Light Description Troubleshoot Green Normal operation Flashing Printer head is Printer will Green overheated automatically resume once the printer head has cooled down. Flashing Paper shortage Be sure that the Red (every 2 printer paper is loaded correctly. seconds) You may need to run automatic label... -
Page 14: Specifications
SPECIFICATIONS Method Direct Thermal Resolution 203 dpi Max Printing Speed 150 mm/s Paper Width 48-108 mm Paper Thickness 0.08-0.2 mm Power Adapter 24 V / 2A Printing Life TPH 100 Km Operating Temperature: -10 to 50 °C Humidity: 10-90% (non condensing) Environment Storage Temperature: -40 to 80 °C... -
Page 15: Safety Notices
SAFETY NOTICES The printer head can become very hot after printing labels. Do not touch the printer head. Do not bend the power cord excessively or place objects on the cord. Do not use the printer if you find any irregularities as these could result in fire or electrocution. - Page 16 SUPPORT Your Rollo printer is covered by a one-year warranty. In the unlikely event that you experience any issues with your printer, please contact Rollo priority customer service to promptly receive troubleshooting tips or a replacement. For any questions and/or suggestions, please email the Rollo team via contact@rolloprinter.com...
Need help?
Do you have a question about the rollo and is the answer not in the manual?
Questions and answers