NEC N8103-94 User Manual page 54

52
5.
Change the Default Write Policy to "Write Back" if not specified.
6.
To change the Default Write Policy:
6-1. Select the Logical tab in the left frame of the window, and then select each
"Virtual Disk" under the Logical tab.
6-2. Select the Set Virtual Disk Properties under the Operations tab in the right
frame of the window, and change the Default Write Policy to Write Back.
6-3. Repeat Steps 6-1 and 6-2 for all Virtual Disk under the Logical tab to change
their Default Write Policy to "Write Back".
Logical
Set Virtual Disk Properties
Operations
Default Write Policy