Playing A Disc; Basic Playback - Toshiba SD-P2700 Owner's Manual

Basic playback

Playing a Disc

This section shows you the basics on how to play a disc.
indicates a reference page of this manual.
See the page in
DVD-V DVD-A
Basic playback
VCD CD
Preparations
• Connect the AC adapter
player.
• When you want to view a disc on a connected TV or monitor
, turn on the equipment and select the video input
54 55
connected to the player.
• When you want to enjoy the sound of discs from an audio
system , turn the audio system on and select the input
55
connected to the player.
• If you use the supplied remote control, make sure that
batteries are loaded in it.
• If you use the headphones, see "Connecting to
Headphones".
56
• Press the open switch to open the LCD monitor.
Press the open
switch to open the
LCD monitor.
Do not forcibly open the
LCD monitor to avoid
damaging this panel.
1
2
4
18
for details.
or the battery pack
16 61
15
STOP
TOP MENU
MENU
/ / /
ENTER
CAUTION
• Keep your fingers clear of the disc as it is spinning.
Neglecting to may cause serious personal injury.
• Be careful not to catch your fingers in the disc holder.
• Do not use a cracked, deformed, or repaired disc.
• Do not tilt, shake or move the main unit while playing. It
may damage the disc.
1
Turn on the power.
to the
The player turns on and the POWER/CHG
indicator on the player illuminates in green.
2
Open the disc cover.
The disc cover will not open over a certain range.
Do not force the cover open further, as it may
cause damage to the player.
3
Set a disc.
Place a disc with the playback side down, and
push gently on the center of the disc to affix it to
the spindle.
4
Close the disc cover.
Press CLOSE on the left corner.
Slide the power switch to "ON".
Press OPEN on the main unit.
The disc cover opens.