Chapter 2 Preparations
Note the following precautions to connect cables.
•
When the device is not Plug and Play device, turn off the server and devices before connecting.
•
If connecting any peripheral device and its interface cable made by other companies (a third party),
contact your sales representative to check if they can be used with the server beforehand.
•
Fix the power cord or interface cable with cable ties.
•
Make sure that no pressure is applied on the plug of power cord.
•
If you connect an external USB DVD-ROM drive to a USB connector at the front of the server, do not
connect any other device to the adjacent USB port.
* The ports in a box in the images below are "adjacent USB ports".
136
Tips
2 ports USB connectors at the rear of the server are supplied with power even
when DC is off.
Express5800/R120e-1E User's Guide
2. Installation and Connection