Battery - Ingenico APOS A8 User Manual

4_4 Battery

4_4_1 Charging the battery
When does the battery need to be charged?
When used daily, the terminal charges its battery each
time the power adapter is connected. Charging starts
automatically.
How can the battery be charged?
Using the power adaptor
Connect the power adapter to the terminal micro USB type
A connector located on the left side of the terminal.
Connect the power adapter to the power supply mains
network.
Check if the Red LED at the top of front is lighted (it means
battery charging).
4_4_2 Installing the battery
WARNING
Check that the terminal is not connected to the main electric
network.
Turn your terminal and unclip the battery trapdoor by pushing the
clips as shown with the arrow on the picture.
Disengage the trapdoor.
Take the battery pack included in the box
Locate the
compartment
Plug the battery pack connector according to the connector
locating system.
Place the battery pack in its compartment
Close the battery trapdoor.
APOS A8
05/18
battery pack connector beside
Copyright© 2018 Ingenico
17
All rights reserved
the battery