Mindeo CS2290 Quick Manual

CS2290 Cordless Image Scanner Quick Guide
Notice
A standard kit contains: a handheld unit, a cradle, a USB cable, and a CD-ROM
(containing software and manuals).
 It is suggested to read the user manual in details before use.
Parts of the handheld unit
① Scan window ② Trigger (Press to triggr / Long press 2 seconds to turn on)
③ Beeper ④ Power indicator (Blue LED)
(Green LED) / Communication fail indicator (Red LED) / Charging (Red LED)
Parts of the cradle
⑥ Power indicator (Blue LED)
⑦ Communication indicator (Green LED)
⑧ Key (Long press 2 seconds to restore factory default
setting of cradle)
Installation of cradle
1. Switch off power of the host. Refer to the below pictures, connect the host with the
scanner with different cables firstly, and then connect the adaptor to the power socket.
2. Ensure that all connections are secure. Switch on the power of the host. After a few
seconds, if only the blue LED on the cradle is ON, it indicates the cradle is in normal
working mode.
USB cable
Note: 1. See user manuals for more information. 2. For better readability, please print this document with laser printer. 3. Version: CS2290_QG_EN_V1.1.
⑤ Successful decoding indicator
RS232 cable PS/2 keyboard cable
Charge battery
1. Please charge the battery before the first time of use.
The charge indicator (Red LED) on the handheld unit is
turned on when the charging is in process. When the
charging process completes, the charge indicator (Red
LED) is turned off.
2. Charging time: 4 hours for fully charged.
3. You can charge the battery via a USB port on the device or
an optional 5 VDC adapter.
Indication of handheld unit for wireless data transmission
Successful
Beeper
Transmission
Yes Off
No Three beeps
Programming instruction and example
Two programming modes have been provided as bellows:

Single-scan setting
Scan the appropriate
Single-scan setting

Multiple-scan setting
Scan "Option bar code"
Scan "The 1st character of option"
Scan "The 2nd character of option"
Scan "END"
Red LED Vibration
Off Off
Blinks 3 times, and Short vibrates 3 times,
then turns off and then turns off
Example: To set Flow control to be XON/XOFF.
Example: To set Flow control to be XON/XOFF.