Advertisement
Quick Links
Premier Hockey Goal Installation Instructions
The following instructions must be followed to ensure that this Mayfield Sports Premier
Hockey Goal System is not damaged during installation and that all parts are correctly
installed. Mayfield Sports will not be held liable for any damage caused by incorrect or
careless installation. If you have any questions regarding installation or if any of the
instructions are not clear to you, please contact us on 09 291 9399/ 021 764 202 or email:
kevin@tennisnets.co.nz
Equipment Checklist: (per goal)
2x Side Frames
1x Rear Backboard
1x Rear Crossbar
1x Front Crossbar
2x Rubber Wheels
1x Hockey Net
10x M12x30mm Bolts and M12 Washers
6x M12x90mm Bolts and M12 Washers
2x Wheel Spacer
2x Large Rubber Wheels
1x 8mm Allen Key
16x Cable Ties
Advertisement
Summary of Contents for MAYFIELD SPORTS Premier Hockey Goal
- Page 1 Hockey Goal System is not damaged during installation and that all parts are correctly installed. Mayfield Sports will not be held liable for any damage caused by incorrect or careless installation. If you have any questions regarding installation or if any of the instructions are not clear to you, please contact us on 09 291 9399/ 021 764 202 or email: kevin@tennisnets.co.nz...
- Page 2 Step 1: • Tip both side frames onto front (with wheel attachment off the ground as shown below). • Loosely bolt front crossbar to both side frames with 4x M12x30mm bolts and washers as shown below. Note: The front crossbar (only crossbar with band edge for attaching net) should be lying on the ground with the band edge facing towards the rear of the goal.
- Page 3 Repeat at other end of the goal. Step 4: • Drape Mayfield Sports Hockey net over the outside of the goal. • Fasten the net with cable ties provided at regular intervals to the front crossbar and front of both side frames.