RVi Towed Battery Charger + User Manual
  1. Manuals
  2. Brands
  3. RVi Manuals
  4. Automobile Battery Charger
  5. Towed Battery Charger +
  6. User manual

RVi Towed Battery Charger + User Manual

Hide thumbs
1
2
3
4

Advertisement

Table of Contents

Towed Battery Charger
Thank you for purchasing the Towed Battery Charger +!
Contents Include:
a) Towed Battery Charger + (TBC+)
b) 5 Wire Ties
c)
4 mounting screws
Failure to connect the TBC+ according to the instructions may result in
damage to your charge circuit or other electronics, in which RVi is not
responsible.
Please contact our customer service department at (800) 815-2159 if you
have any questions regarding the installation of the TBC+.
Before continuing we recommend watching our videos at rvivideo.com

INSIDE THE BOX

INSTALLATION:
TROUBLESHOOTING:
PAIRING STEPS:
USER GUIDE
pg. 2
pg. 4
pg. 5
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Towed Battery Charger + and is the answer not in the manual?

Questions and answers

Summary of Contents for RVi Towed Battery Charger +

  • Page 1 4 mounting screws Failure to connect the TBC+ according to the instructions may result in damage to your charge circuit or other electronics, in which RVi is not responsible. Please contact our customer service department at (800) 815-2159 if you have any questions regarding the installation of the TBC+.
  • Page 2 INSTALLATION 1) Mounting the TBC+: Find a location near the towed vehicle’s battery to mount the box. This location should allow you to easily route the duplex wire to the vehicle battery terminals. Use provided wire ties or screws to mount the box in place. You can mount the box along the inner fender with the screws or on a wire loom with the wire ties.

  • Page 3: Troubleshooting

    TROUBLESHOOTING You will need to ensure that there is a constant 12V supply to the multi- pin connector on the bumper of your motorhome. If there is a constant 12V supply greater than the voltage of the towed battery, the motorhome engine is running, and the umbilical is plugged into both the motorhome and the towed vehicle, the RV LED on the TBC+ will flash.
  • Page 4 3) On the tablet, click Add Device from the tablet Dashboard. 4) On the new screen, enable TBC+ by toggling the on/off slider to ON. At this time, the tablet will walk you through pairing. 5) You will be asked to pair to TBC+ by taking a picture of the QR code on the back of this User Guide.

Table of Contents