Calculation Range; Display Settings; Zoom - Jeti specbos 1211 Short Instructions

Table of Contents

Advertisement

Operating Instructions
7.1.5

Calculation Range

The menu point Options/ Calculation Range allows to specify if the
radiometric value will be calculated from the entire calibrated
wavelength range (specbos 1201 380 ... 780 nm; specbos 1211
350 ... 1000 nm) or only from the limited (displayed) range (user
selected range).
See chapter Spectra Calculations how to change the wavelength
range.

7.2. Display Settings

7.2.1

Zoom

Diagrams can be zoomed with the cursor
by pressing CTRL. The kind of zoom can
be selected in the pop up menu left to the
JETI logo. X-Zoom and Z-Zoom is only
valid for the spectrum diagram.
Zoom out by pressing RESET below the
Zoom pop up menu.
The start and the end of the displayed
spectrum can alternatively be adjusted at the screen edge below the
diagram with Start of Spectrum and End of Spectrum. In addition of
using the up/down arrows, the displayed spectral limits can be typed
in using the keyboard number pad. The maximum interval for
specbos 1x01 is between 380 nm and 780 nm. Always the full
spectral range of the device is used for a measurement.
JETI – Spectroradiometer specbos 1211
- 34 -

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the specbos 1211 and is the answer not in the manual?

Questions and answers

Table of Contents