Installation of shower system Install fixing bracket (G), see Fig. [3] and [5]. Application Hang the shower system on the upper fixing bracket (G) and secure using In order to ensure correct operation, a pressure of at least 1.5 bar is necessary at the washer (G1) and nut (G2), see fold-out page IV Fig.
Page 5
Adjusting the economy stop IV. Non-return valve (T), see Fig. [19]. 1. Lever out cap (O1). 2. Remove screw (O2) and detach thermostat knob (O). Volume adjustment, see Figs. [13] and [14]. 3. Lever out rosettes (J) and remove fixing rings (C) using installation tool (A). •...
Need help?
Do you have a question about the Aquatower 3000 and is the answer not in the manual?
Questions and answers