Summary of Contents for Bissell PROHEAT 1899 Series
Page 1
PROHEAT ® Deep Cleaner _______________ USER GUIDE 1899 SERIES More of a video person? Look for this icon and go online for an instructional how-to video at www.BISSELL.ca IMAGES MAY VARY...
3-prong grounded plug. » Do not handle plug or appliance » Use only BISSELL cleaning » Do not leave appliance when it is with wet hands. products intended for use plugged in. Unplug from outlet when with this appliance to prevent »...
Thanks for buying a BISSELL carpet cleaner! We love to clean and we’re excited to share one of our innovative products with you. This guide has important instructions on how your new carpet cleaner works, including using (pages 8-11), maintaining (page 12-13), and if there is a problem, troubleshooting (page 14).
Quick Release™ Hose Wrap Belt Access Door 10 Ready-to-Use Hose 6 Rows DirtLifter™ PowerBrush Extra Long Power Cord (under nozzle) Lower Hose Wrap Floor Nozzle 2-in-1 Tank Spray Trigger Recline Pedal Cord Clip Power Switch *Tools included may vary www.BISSELL.ca...
WARNING: To reduce the risk of fi re and electric shock when cleaning a hard fl oor, the BISSELL bare fl oor tool (2035641) must be used and is only to be used with BISSELL Hard Floor Solutions formula intended for use with this appliance. To reduce the risk of electric shock due to internal component damage, use only BISSELL cleaning formulas intended for use with the deep cleaner.
Attach lower hose rack by sliding it in place on the lower Wrap fl ex hose around body assembly and securing it with 2 short screws. hose rack and secure it into notched out Attach Tough Stain tool to end of hose. holder as shown. www.BISSELL.ca...
Page 7
Pretreating your carpet is recommended to improve cleaning e ectiveness for heavily soiled carpet in high tra c areas such as entryways and hallways. a. Spray the BISSELL Stain PreTreat formula onto heavy tra c areas, soiled areas, or stains.
Page 8
Remove the lid and turn it over to locate the measuring cup. 3-Fill with BISSELL 2X formula to the indi- cated fill line on the built in measuring cup and pour it into the bladder.
NOTE: You may notice hair and debris deposits on the carpet or in the tank that were loosened by the cleaning action (especially with newer carpets that may have never been deep cleaned before). This debris should be picked up and thrown away. www.BISSELL.ca...
Page 10
Allow the hose and tool time to dry before storing. WARNING WARNING: To reduce the risk of injury, be extra careful when cleaning stairs. Make sure the machine is secure and level. www.BISSELL.ca...
Freezing will damage lint screen. internal components and void the warranty. WARNING To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. www.BISSELL.ca...
2-in-1 tank machine. Always should always get wrap the power an extra rinse-out. cord and make Rinse under and sure the hose is around the bladder securely wrapped. as well as the lint screen. www.BISSELL.ca...
Page 13
Pictured here is the snap shut. Pump Belt. If broken, gently remove the belt. To re-install a new Pump Belt, loop one end of the new belt around the red pump pulley and then stretch it to the silver motor shaft. www.BISSELL.ca...
Refer to instructions on page 13 for Belt DirtLifter® OFF or broken. Replacement. Please visit bissell.com or PowerBrush does call BISSELL Consumer Services at 1-800- not turn 263-2535 Instructions will accompany the replacement belt. ReadyTools dial may be on the...
Service If your BISSELL product should require service: Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.
Need help?
Do you have a question about the PROHEAT 1899 Series and is the answer not in the manual?
Questions and answers