Station Speed Dial Programming:
1. Press Speaker
2. Enter the speed dial number you'd like to Program (0 to 9)
3. Dial 9 plus a telephone number
4. Press Hold
5. Using keypad, Spell out name (NOTE: Pressing # after the letter will move the cursor to the right, press
Feature to backup)
6. Press Hold
7. Enter Next Speed Dial to be programmed and follow steps 3 – 6 to program another OR
8. Press Speaker
To Use: Lift Handset, press #, press 7 enter speed dial number (0 – 9)
to scroll through speed dials, then lift handset
System Speed Dial:
Lift Handset (or press Speaker),
Press Redial key
Enter Speed Dial Number you'd like to call 000-999
Key in Name of the contact
speed dials
OR
Lift Handset to connect call
Ring Tone:
Press Speaker
Press 1 to set Internal ring or 2 for External ring
Dial from 1 to 8 to listen to the different ring tones
Press Speaker
Ring Volume:
Press Speaker
Use arrow keys to adjust volume
Press Speaker
Key, enter 755
Key when finished
Key, dial 720
key to Save
Key, dial 729
Key
Press Dir soft key, then STA, then
OR
Press the Phonebook key, Scroll through
OR
Page 3 of 3
Service:
604 -856- 9155
Email:
service@natg.ca