Jack Stands; Specifications - Craftsman 48181 Operator's Manual

Jack Stands

SAFETY INSTRUCTIONS
Read Operating Instructions
Study, understand and follow all instructions in
this manual before operating the jack stands.
Failure to heed these warnings may result in
loss of load, damage to the jack stands and/or
jack stands failure resulting in personal injury
or property damage.
Position the Jack stand
Position the jack stands to only lift on the
areas of the vehicle specified by the vehicle
manufacturer.
Do Not Overload Jack stand
Do not overload these jack stands beyond
their rated capacity. Overloading these jack
stands beyond their rated capacity can cause
damage to or failure of the jack stands.
Use on Hard Level Surface
These jack stands are designed only for use
on hard level surfaces capable of sustaining
the load. Never use stands on sloped, inclined,
angled or soft surfaces.
Rated capacity is per pair! Do not exceed
rated capacity. Use as an identical pair to
support one end of a vehicle only. Only use 1
pair per vehicle! Jack stands are not meant to
be used to simultaneously support both ends
or one side of a vehicle. Never use any other
additional support that is not appropriately
rated for the vehicle. Some vehicles require
an adapter to properly engage the frame for
lifting. Only attachments and/or adapters
supplied by the manufacturer shall be used.
CRAFTSMAN LIMITED WARRANTY
CRAFTSMAN LIMITED WARRANTY
FOR ONE YEAR from the date of sale this
product is warranty against defects in material
or workmanship. WITH PROOF OF SALE
a defective product will be replaced free of
charge.
For warranty coverage details to obtain
free replacement, visit the web page: www.
craftsman.com/warranty
This warranty applies for only 90 days from
the date of sale if this product is ever used
while providing commercial services or if
rented to another person.
This warranty gives you specific legal rights,
and you may also have other rights which vary
from state to state.
Sears Brands Management Corporation,
Hoffman Estates, IL 60179
DESCRIPTION
These jack stands feature a 6,000 lbs. per pair
maximum capacity. Support range for these
jack stands is 11-3/8 to 16-3/4 inches. Jack
stands feature a rugged ratchet column design
for fast, easy and secure adjustment. Wide
stance for added stability. Baked enamel finish
help resists rust and corrosion.

Specifications

Compact design allows use in confined spaces
Maximum load capacity
(Per pair)..............3 tons (6,000 lbs.)
Jack stand support range..11-3/8 to 16-3/4 inches
Weight................................................12.76 lbs
WARNING: This product contains chemicals
known to the state of California to cause
cancer and birth defects or other reproductive
harm. www.P65Warnings.ca.gov
7