SC-F9200 Series
4.1.5 Service Program Basic Operations
This section describes the basic operations of the Service Program.
Save the Service Program on the desktop or directly under the
C A U T I O N
C drive. If the storage location is deep in the hierarchy, some
program tools may not work correctly.
If adjust the print adjustment, select the
and change the
Select Media
control panel.
System Requirements
OS:
Windows Vista, 7, 8/8.1
Interface:
USB, Network
C H E C K
The network can be used only for the following two adjustments.
P O I N T
MAC Address Input
USB Port and Network Communication Check
Startup
1.
Install the Communication Driver.
2.
Double-click the "servprog.exe". A screen that asks if you want to carry out
the NVRAM Backup appears.
3.
Select Yes to start the NVRAM Backup tool, or select No to display the
Service Program Menu screen.
4.
Select the printer you want to adjust from
adjustment.
ADJUSTMENT
Media Setup
menu
setting to
RIP Setting "0"
on the
Model
Selection, and start the
Overview
Figure 4-1. Service Program
SE Group Confidential (Related Staff Only)
Revision C
281