SMART CLEAN ROOM PHONE CRIII SS User & Installation Instructions

USER / INSTALLATION INSTRUCTIONS FOR SMART
CLEAN ROOM PHONE MODEL-CRIII SS (AD)
1) Connect EPABX EXTENSION line to the unit.
2) Connect A/C mains input to the unit.
3) Switch on the supply to the unit.
Telephone operation:-
PROGRAMMING AUTODIAL:
1) PRESS AUTODIAL KEY
2) SWITCH ON POWER SUPPLY TO THE TELEPHONE
3) RELEASE AUTODIAL KEY
4) DIAL REQUIRED EXTENSION NUMBER TO BE AUTODIALED
5) DIAL # ( HASH ) TO COMPLETE PROGRAMMING
OUT GOING CALLS:
1) Press ON, dial tone will be heard on speaker dial required extension number.
2) On connection communicate hands free.
3) Call get Auto disconnect after communication is over in few seconds.
4) To AUTO DIAL PRESS ON FOLLOWED BY AUTODIAL ON GETTING
DIALTONE
INCOMING CALLS:
1) The telephone will ring on incoming call.
2) The inbuilt Ringer wills energies.
3) To communicate press ON and Speak Hands free.
4) Call get auto disconnect after communication is over.
Kindly note: Use 100 mA fuse for telephone & 250mA for
external driver only