Front Panel (Portwell Cad-0208); Rear Panel (Portwell Cad-0208) - Avaya Session Border Controller for Enterprise Manual

Front panel (Portwell CAD-0208)

Number Component
1 Power LED
2 Status LED (D2)
3 Network Activity LEDs

Rear panel (Portwell CAD-0208)

Number Component
1 Power On/Off Switch
2 Reset Button
3 DC In Jack
August 2015
Comments on this document? infodev@avaya.com
Description
This LED is illuminated when power to the
unit is turned on.
This LED flashes to indicate hard-disk-drive
activity.
Four pairs of Active/Link LEDs labeled M1,
A1, A2, and B1.
Description
The Power On/Off switch turns system power on
and off.
The system reset button.
This button is recessed and can be pressed
using the end of a paper clip. Use this button
only if directed to do so by qualified support
personnel or by the product documentation.
The DC Power Jack (15V).
Deploying Avaya SBCE
Panel descriptions
Table continues...
15