Sitecom WL-330 How-To Manual

How do I check if I have a connection with my range extender?

In this FAQ we will assume that you have configured the range extender.

You have installed your range extender, and now you want to know whether the connection has

been established. You can only check this on the devices you have connected to your range extender

or want to connect to it.

For Windows, perform the following steps to check the connection.

1. Go to the icon in the bottom right corner of your screen, marked in red below.

2. Left-click it once.

3. The following window (list) will now open.

This window shows all the wireless networks found by your device. The device must be compatible

with your range extender.

Page 1

Table of Contents

Do you have a question about the WL-330 and is the answer not in the manual?

Page 1 How do I check if I have a connection with my range extender? In this FAQ we will assume that you have configured the range extender. You have installed your range extender, and now you want to know whether the connection has been established.
Page 2 _EXT to it.  The Sitecom WL-330 does not adopt the network name of the router (or modem router). This model always retains its own network name. You can find this network name on the sticker on the bottom of the product.
Page 3 _EXT to it.  The Sitecom WL-330 does not adopt the network name of the router (or modem router). This model always retains its own network name. You can find this network name on the sticker on the bottom of the product.
Page 4 Back label of the WL-330, with the network name marked in red Please note! If you changed your range extender's network name in the settings menu in the past, you naturally need to look for that name. Please note! If your range extender's network name does not appear immediately, refresh the list by switching Wi-Fi off and on (marked in red in the picture).