NAD AMP 1 Owner's Manual page 5

Quick install Guide
Start up
To do initial setup of NAD Amp1 and connect to a network, follow the points 1-7 below.
Notice: the NAD Amp1 has built in Wi-Fi but NAD Amp1 also has LAN connection.
We recommend using the LAN connection, if possible, for optimal signal and signal stability.
Install the Google Home
app on your mobile device
(if not already installed).
The AMP1 is now in hotspot mode and
ready for Wi-Fi setup
Select the NAD-Chromecast-build-in Amplifier
listed and tap SETUP > Continue and Follow
the guide to finish setup.
When connecting the AMP1 via a LAN cable to your Home network, you just need to open the Google Home app
after connecting the LAN and power up the amp. start with point 6 from above.
Google and Chromecast build-in are trademarks of Google inc.
Connect a pair of speakers to the
amplifier's corresponding
speaker terminals.
Plug in the AMP1 and it will power up
Wait 30-60 seconds until the 1st
right/left
blue LED light is flashing
Open the Google Home app , tap "Devices" in
the top right corner of the screen
De Chromecast cast button
The AMP1 is now ready for use. go to a music
streaming app or a song stored on your mobile
device and look for the cast icon to start streaming
music to the AMP1
een nieuw apparaat is
gevonden
5