Disassembly - Silvercrest RT2000 Operating Manual

If necessary, use a screwdriver to slightly prise open the
adapter in the area of the screw�
2�
Fix the corresponding adapter with the screw and nut
supplied (see Fig� 2 and Fig� 3 on the fold-out page)�
In the case of the RAV valve, the plunger extension (15) must
also be mounted on the valve pin (see Fig� 2 on the fold-out
page)�
3�
Screw the device onto the fitted adapter or directly onto
the radiator valve with the aid of the union nut (1)�
4�
Press the
cally�
The device adjusts to the stroke of your radiator valve� For
this purpose, the radiator valve is opened and closed several
times so that the device determines the end points� This pro-
cess may take a few minutes under certain circumstances�
Due to the continuous thread, the pressure piece
fitted on the underside can drop out if the
regulator has not been mounted on the valve� Fit
the pressure piece back in place in such cases�
The continuous thread turns and tightens the pressure piece�
Restart the adaptation, if necessary�
After successful adaptation, the device enters Automatic
mode �
AUTO

Disassembly

Caution! Risk of burns through hot radi-
ator valve! Contact could lead to hands
being burned� Allow the radiator to cool
38
G
button� The adaptation starts automati-
OK