Radio Operations; External Component Operations; Sound Adjustments; Adjusting The Sound - JVC KD-S15 Instructions & Installation

OPERATIONS
Basic operations
Remote sensor
Control panel
DO NOT expose to strong light.
• Turn on the power.
• Turn off the power [Hold].
• Attenuate the sound (if the
power is on).
Detach the panel.
Select the source.
Display window
Playback mode / item indicator
Disc indicator
Tr (track) indicator
• Source display
• Track number
• Volume level indicator
• Time countdown indicator

Radio operations

Select "FM/AM."
Select the bands.
Search for a station—Auto Search.
Manual Search: Hold either one of the buttons until "M" flashes on the display, then press it repeatedly.
When an FM stereo broadcast is hard to receive
Reception improves, but the stereo effect will be lost.
• MO indicator lights up.
To restore the stereo effect, repeat the same procedure.
FM station automatic presetting —SSM (Strong-station Sequential Memory)
You can preset six stations for each band.
Manual presetting
Example: Storing the FM station of 92.5 MHz into preset number 4 of the FM1 band.

External component operations

SETTINGS

Sound adjustments

Preset values
BAS MID
(bass) (mid-range)
Indication (For)
USER (Flat sound) 00 00
ROCK (Rock or disco music) +03 00
CLASSIC (Classical music) +01 00
POPS (Light music) +02 +01
HIP HOP (Funk or rap music) +04 –02
JAZZ (Jazz music) +03 00
Check the current clock time/other information.
See also "CLK DISP" of "General settings—PSM."
Volume control.
• MO: Lights up in monaural mode.
• ST: Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
LOUD (loudness) indicator
EQ (equalizer) indicator
Main display (time, Sound mode (iEQ: intelligent equalizer)
playback information) indicator
Select preset station.
5 ∞
• You can also use / to select preset station.
Stereo mini plug (not supplied)

Adjusting the sound

TRE LOUD
(treble)
(loudness)
2
BAS* (bass)
00 OFF
2
MID* (mid-range) : Adjust the middle frequencies sound level. –06 to +06
+02 OFF
2
TRE* (treble)
+03 OFF
3
FAD* (fader)
+02 OFF
BAL (balance)
+01 OFF
+03 OFF
Remote controller—RM-RK50
7
Installing battery
Lithium coin battery (CR2025)
For USA-California Only: This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—
special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
7
Features
• Turns the power on if pressed briefly or
attenuates the sound when power is on.
• Turns the power off if pressed and held.
• Changes the FM/AM bands with
• Changes the preset stations with D
• Adjusts the volume level.
Disc operations
Eject disc.
• Press SRC to
listen to another
playback source.
4 ¢
• /
[Press] Go to the next or previous track.
[Hold] Fast-forwards or reverses the track.
Turn on the power.
Insert disc.
All tracks will be played repeatedly until you change the source or eject the disc.
Selecting the playback modes
After pressing M MODE, press the following buttons to...
TRK RPT : Plays the current track
repeatedly.
RPT OFF : Cancels.
ALL RND : Plays all tracks of the current
disc at random.
RND OFF : Cancels.
Skipping a track quickly during play
Example: Select track 32
Portable audio player, etc.
: Adjust the bass. –06 to +06
: Adjust the treble. –06 to +06
: Adjust the front and rear speaker balance. R06 to F06
: Adjust the left and right speaker balance. L06 to R06
2 – EN
Warning: To prevent accidents and damage
• Do not install any battery other than CR2025 or its
equivalent.
• Store out of reach of children.
• Do not recharge, short, or dismantle.
• Do not dispose of in fire.
• Do not carry around with other metallic materials.
• Selects the sound mode
(iEQ: intelligent equalizer).
• Selects the source.
5
U.
∞
.
• Searches for stations if pressed briefly.
• Fast-forwards or reverses the track if
pressed and held.
• Changes the track of the disc if pressed
briefly.
[Press] Select track number (01 – 06).
[Hold] Select track number (07 – 12).
Changing the display information
: Clock with the current track number
: The elapsed playing time with the current track
number
* If the current disc is an audio CD, "NO NAME" appears.
Prohibiting disc ejection
You can lock a disc in the loading slot.
To cancel the prohibition, repeat the same procedure.
You can connect an external component to the AUX (auxiliary) input jack on the
control panel.
Turn on the connected
component and start
playing the source.
4
LOUD* (loudness) : Boost low and high frequencies to
produce a well-balanced sound at
a low volume level.
SUB.W (subwoofer) : Adjust the subwoofer output level. 00 to 08
VOL (volume) : Adjust the volume.
* 1 Displayed only when "L/O MODE" is set to "WOOFER."
* 2 When you adjust the bass, mid-range, or treble, the adjustment you have made
is stored for the currently selected sound mode (iEQ) including "USER."
* 3
If you are using a two-speaker system, set the fader level to "00."
* 4 The adjustment made (LOUD ON/LOUD OFF) will be applied to all sound modes
(iEQ).
* 5 Depending on the amplifier gain control setting.
LOUD ON or
LOUD OFF
00 to 50
(or 00 to 30)* 5
\
See reverse page