Seat Lock - TVS Sport Owner's Manual

KNOW YOUR TVS SPORT
Open the cover frame L in the following manner to
access the battery assembly.
1. Remove the mounting screws (A) & (B) from
the front and rear mounting of the cover frame.
2. Gently pull out the front end (C) of the cover
frame from fuel tank cushion.
3. Carefully dislocate the cover frame lugs from
the cover seat tail and take out the cover frame.
Reassembly
1. Locate the lugs provided at the rear end of the
cover frame to the location provided of the
cover seat tail.
2. Gently press the lug provided in the front (C) of
the cover frame into the fuel tank cushion.
3. Assemble the screws (A) & (B) and tighten.
Caution
While reassembling the cover frames, see that the
rubber cushions provided for the cover lugs are in
place.

SEAT LOCK

Seat lock is provided at the tail end of the vehicle to
open the seat assembly and there by accessing the
tool kit and first aid kit.
To open the seat assembly,
1. Insert the control key into the seat lock and
rotate it in clockwise direction.
2. Take out the seat assembly by lifting it from the
rear end and gently tapping it on the front end.
For reassembling,
1. Assemble the seat in the frame and push it
forward.
-17-