Bissell EASY SWEEP COMPACT 2484 Series Assembly & Use

Manual sweeper

EASY SWEEP COMPACT

Manual Sweeper

2484 SERIES

Fit the threaded handle sections together and screw

tightly until secure. Screw the handle grip on the

threaded end of the handle.

To use, simply push the sweeper. For best results,

ensure that the front of the sweeper is facing forward

while using.

Emptying

To empty the dirt bins, hold the sweeper over

a trash bin or bag and press the bottom of each dirt

bin at the points indicated by the "PUSH" arrows.

For best performance keep brushes and bearings clean of

hair, threads and other debris. The brush roll on this

sweeper removes to allow for easier brush cleaning

1. Locate the front of the sweeper. Position the sweeper so that the front is top, and

the grey end of the brush roll is on the right side.

2. Locate the small tabs on both dirt bins and lift the tabs slightly and push outward

so that they rest on the outside edge of the bumper. This will ensure that the dirt bins

stay in place while removing the brush roll.

Front of Sweeper

Grey end

(right side)

Tab

Table of Contents

Do you have a question about the EASY SWEEP COMPACT 2484 Series and is the answer not in the manual?

Page 1 EASY SWEEP COMPACT Manual Sweeper 2484 SERIES Fit the threaded handle sections together and screw tightly until secure. Screw the handle grip on the threaded end of the handle. To use, simply push the sweeper. For best results, ensure that the front of the sweeper is facing forward while using.
Page 2 If your BISSELL product should require service: Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.