Advertisement
Note: Phone will attempt to setup, if setup fails, power down unit & repower – see if it sets up
To change the registration to the SSID:
1) Press Menu
2) Press '8' System, press ok (center of circle)
3) Enter password: 0000
4) Select "9 SSID", press ok (center of circle)
5) SSID menu, select Auto (should be highlighted), press ok
6) Select Network, press ok
7) Encryption: Select Hex
8) Enter wifi code: press ok
(Notes: -Pressing a touch tone digit will result in a letter in the display,
-Touching it again, brings next letter up; (i.e. 2 = A, 22 = B);
-Letters will appear in CAPs by default until toggled to lower case letters
-To enter numbers, press and hold digit on dial pad until number appears
-If you have to enter MN in the code or MO in the code:
Type first letter & wait until the cursor moves before entering next digit in
-To toggle to lower case letters (remain in lower case until CAPS toggled)
-Before you enter digit, press menu key:
(you will see in display: ENG eng SYM)
-Arrow over to selection desired, when highlighted, press OK
Use right portion of circle (phone symbol) to arrow right or
Left portion of circle (envelope symbol) to arrow left to highlight
9) Once Encryption code entered, down arrow to Registration, press ok
Note: Phone will attempt to setup, if setup fails, power down unit & repower – see if it sets up
Buttons on phone:
Menu
Circle
Handset
TRSF
C
1
2 ABC
4 GHI
5 JKL
7 PRS
8 TUV
*
0 [_]
Circle :
Envelope (left button on circle)
Speaker
Phone/Power
Hold
3 DEF
6 MNO
9 WXYZ
# @ Lock
.... (Top button on circle)
OK
Music notes (bottom button on circle)
Telephone (right button on circle)
Advertisement
