TechniSat DIGIT Series Short Manual page 6

Dvb-c
Hide thumbs Also See for DIGIT Series:
Table of Contents

Advertisement

Available languages

Available languages

> With the right and left arrow keys, you can switch between mono line 1(), mono line 2(), and
stereo.
Volume control
> Adjust the volume of your digital receiver by using the volume + (louder) and volume - (softer)
keys.
> By pressing the mute key, sound is switched on or off.
TV/Radio selection
> By pressing the TV/Radio key, you switch between TV and radio modes.
Sorting programs/Configuring favorites lists
This chapter describes how you can change the factory settings of your Digital Receiver and program
favorites lists to fit your needs. This function is also needed to add a newly found program to your list.
Keep the following in mind: Your unit has two program lists, a favorites list and a whole list. The
favorites program list has all programs that you have selected using the method explained below.
In the whole list, all programs are listed.
Program list management
In order to edit your favorites list, use the following method:
> Call up the main menu using the menu key.
> Select the line "TV lists" with the up and down arrow keys, in order to edit the TV lists, or "Radio
lists" in order to edit the radio lists respectively.
> Confirm with "OK". The program management list tool appears for editing the particular favorites
list (TV or radio list.) On the right side of the screen, the favorites list is shown. On the left side
of the screen, you see the whole list, sorted alphabetically. All available programs are shown in
this whole list.
> By pressing the red function key, the selection is changed to the whole list. This is now active.
> By pressing the key again, a selection window is blended in. Here, you can sort the whole list
according to different criteria (e.g. all stations, all free stations, all new stations, all found
stations, all English stations etc.) or even provider.
> Choose the program list using the up and down arrow keys (e.g. whole list).
> Confirm with "OK". Now a further selection window appears.
> Select the selection criteria using the up and down arrow keys, according to which the whole list
should be sorted. Choose, for example "all stations," in order to show all programs that are
in the whole list or "all new," in order to show all newly found programs (from the last ran "find"
command) or "all English", in order to show all English programs.
> Confirm with "OK".
Now, according to your selection, a program list with "all", "all new", or "all English language" programs
will be displayed. Programs that have already been added to the favorites list are marked with a check.
> By pressing the red function key "Program" or the green function key "TV list", you can toggle
between the favorites list and the whole list. The active list is marked blue.
Adding programs to the favorites list
In order to put programs from the whole list into the favorites list, start the program list
management, as described before, and switch to the whole list.
> Press the blue function key "Functions". A selection window appears with the available
functions.
> Select the lines to add with the up and down arrow keys.
> Confirm with "OK."
6

Advertisement

Table of Contents
loading

Table of Contents