Focon Showtechnic EXPOLITE Retron LED 575 User Manual page 31

Setting DMX-Address
MENU
Address
The DMX start address of the fixture is set in the menu ADDRESS. This is retained even when
changing the Chanel Mode.
Setting DMX-Channels
MENU
Config Mode
The user can set the DMX Channel Mode In Config Mode, submenu Channel Mode. The following
numbers of channels are available: 2-/7-/16-/51-/55-/64 Channels.
Config Mode
MENU
Config Mode
Keep Screen On: ENABLEs or DISABLEs display illumination of the fixture.
ist.
Keep DMX Data: sets how the fixture responses if DMX-signal gets lost. Set ENABLE to hold the last
received value or DISABLE for blackout.
Fast Dimmer: gives you the opportunity to make the fixture behave as a halogen light
(DISABLE) or not (ENABLE).
0 - 255
2Ch
Channel Mode
7Ch
16Ch
51Ch
55Ch
64Ch
Keep Screen On Disable
Enable
Keep DMX Data Disable
Enable
Disable
Fast Dimmer
Enable
E-31