Do you have a question about the 43U5865 Series and is the answer not in the manual?
Questions and answers
ROBERTO REY
March 29, 2025
Connect to the WiFi router
1 comments:
Mr. Anderson
March 29, 2025
To connect the Toshiba 43U5865 Series TV to a WiFi router:
1. Press HOME on the remote. 2. Go to Settings > Network > Network Configuration. 3. Select "Connection Type" and choose "Wireless network connection." 4. Select your WiFi network (SSID) from the list. 5. Enter the WiFi password. 6. Confirm and connect.
You can also access "Advanced Settings" for more wireless network options.
Notifications ..................17 Using Upgrade................. 17 • Thank you for purchasing this Toshiba LED TV. This manual will help you use the exciting features of your new TV. • Instructions in this manual are based on using the remote control.
Important Safety Precautions 6. Never block or cover the slots and openings in the cabinet. Be sure to observe the following instructions and precautions to ensure safe use of this TV. • Never place the TV so that it is facing upward or on its side. • Never place the TV in a closet, bookcase or other similar area where the ventilation is poor.
Page 5
Important Safety Precautions Cleaning wall outlet for safety. The TV is not completely disconnected from the power supply line, as minute current is consumed even when the Power switch CAUTION: Avoid using chemicals (such as air refreshers, is turned off. cleaning agents, etc.) on or near the TV pedestal.
Page 6
RISK OF E LECTRIC SHOCK. DO NOT OPEN. • Toshiba is not liable for any damage caused by neglect of the instructions described in the owner’s manual. - This lightning flash with arrowhead symbol within an equilateral • Toshiba is not liable for any damage caused by misuse or...
Getting started Accessories List TV Front The following accessories are included with TV: OWNER’S MANUAL× 1 Base Stand × 2 Remote Control × 1 AAA Battery × 2 Screw × 4 Power Cord × 1 Installing the Stand or Wall Mount Bracket Installing the Stand CAUTION • Be sure to disconnect the A/C power cord before installing a stand...
Getting started TV Rear Power input NOTES ANT2 Jack supports power supply for satellite antenna (13/18V, 0.5A max.) Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure.
Getting started Terminals ANT 1 Connect an outdoor VHF/UHF antenna. DVB-T/T2/C ANT 2 Connect an outdoor Satellite antenna. DVB-S/S2 HDMI Connect a HDMI High Definition Multimedia cable from external equipment. VIDEO Connect a composite video cable and left-right audio cables from an external AV device. VIDEO The VIDEO can be used to connect a range of equipment, including video recorders, INPUT...
Getting started Ethernet Refresh Refresh wireless network. Connecting to the Internet NOTES NOTES • If no wireless router is found, select Add and enter the network name in the SSID. • You get access to the Internet through your TV. • If no wireless router is found, select Refresh.
Use with incorrect settings may violate certain laws or other Common Interface regulations, and may result in criminal punishment. In such cases, TOSHIBA CORPORATION and the Toshiba Group shall bear no responsibility whatsoever. Insert the CI+ module for watching scrambled services like pay-tv channels or some HD channels.
Remote Control Buttons on the Remote Control POWER: Switch the TV on or into standby mode : Select input source P.MODE: Select picture mode S.MODE: Select sound mode :Display the current programme information APPS: Fast access to all applications MEDIA: Enter the media TV: Enter the Live TV 0-9: Direct channel selection or numbers input MENU: Display the Quick setup menu...
Remote Control Installing Batteries in the Remote Control Press the release button on the back of the remote control to remove the battery compartment cover. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.
General Operation Turning the TV on for the First Time Channel Edit 1. Connect the mains cable to the mains socket after you have HOME > Settings > Channel > Channel Edit completed all the connections. Manually edit the channel list order to your preference. 2.
General Operation Guide Introduction of the sub-menu 1. Channel List ◄ LIST > > Channel List ・All It provides convenience to check TV programmes that will be Displays the channels that have been automatically available in the next 7 days. The information displayed by the Guide searched.
General Operation Delete the recorded programme Select Edit and then select recorded programme in recording ► list, press button to remove the recorded programme. Or The PVR function allows you to easily record digital television ˃ Recorded Files, select the programmes you can press content for later viewing.
General Operation Adjusting the Picture Quality Configuring advanced picture settings HOME ˃ Settings ˃ Picture > Picture Mode Settings Adjust current picture mode to apply to all sources or just You can select the Picture Mode that provides the best current source.
General Operation Sound Surround RGB Only Mode Surround sound uses DTS TruSurround to deliver an View images based on default settings or choose the immersive surround sound experience from the TV’s colour red, blue or green. internal speakers. Restore Current Picture Mode Settings Dialog Clarity Restore all the picture settings in the current picture Dialog Clarity uses DTS Dialog Clarity...
General Operation Notifications Using Set Time HOME ˃ Settings ˃ System > Advanced Settings > ˃ Settings ˃ System > Time HOME Notifications Set the current time based on your location. Allow pop-up notifications to appear for useful information and events that occur with your TV, including: Advertising, Time Format N e w A r r i v a l s , W a r n i n g s A n d L e g a l S t a t e m e n t s a n d...
Smart Functions Screen Mirroring Getting Familiar with the Home Screen Mirror content from your Android device to the TV. NOTE The image is only for reference and may be different from the HOME ˃ Inputs ˃ Screen Mirroring image on your TV. 1.
Display the total memory and available space of connected device. You must obtain any required permission from copyright owners to download or use copyrighted content. TOSHIBA cannot and does not grant such permission. ˃ Media > connected device...
Troubleshooting Self Diagnosis Sound Problem Diagnose issues with your TV When the TV has difficulties with sound, these steps may help resolve the problem. HOME ˃ Settings ˃ Support ˃ Self Diagnosis Sound Test Use the Picture Test to help diagnose video issues and the Sound Test to diagnose sound issues.
Troubleshooting Recording/Timeshift Function Isn’t Working The Problem Possible Solutions ・ Check the correct connection on the external I have connected When Timeshift or Schedule recording aren’t working, these steps source and the input connection on the TV. an external may help resolve the problem. source to my ・...
Specifications Features, appearance and specifications are subject to change without notice. Item 43" 50” Dimension Without Stand 970 × 573 × 71 mm 1127 × 661 × 73 mm (W × H × D) With Stand 970 × 609 × 208 mm 1127 ×...
For more detailed information about the collection and recycling programmes available in your country/region, please visit our website (www.toshiba.eu/recycling) or contact your local city office or the shop where you purchased the product.
Page 27
For more detailed information about the collection and recycling programmes available in your country/region, please visit our website (www.toshiba.eu/recycling) or contact your local city office or the shop where you purchased the product. Jordan only...
Need help?
Do you have a question about the 43U5865 Series and is the answer not in the manual?
Questions and answers
Connect to the WiFi router
To connect the Toshiba 43U5865 Series TV to a WiFi router:
1. Press HOME on the remote.
2. Go to Settings > Network > Network Configuration.
3. Select "Connection Type" and choose "Wireless network connection."
4. Select your WiFi network (SSID) from the list.
5. Enter the WiFi password.
6. Confirm and connect.
You can also access "Advanced Settings" for more wireless network options.
This answer is automatically generated