Troubleshooting - Russell Hobbs RHECOI Warranty And Instruction

TROUBLE-SHOOTING
Problem
No steam is being produced
or leakage.
Iron does not heat up
Leaking water
soleplate.
Little Steam
Possible Reasons
The ttemperature dial has been
set to "
Power plug is not plugged in
properly to
supply outlet
The required steam setting is not
selected
from There is still not enough heat
being produced.
The water is over the max
position.
A steam hole is blocked.
Too little water in the water tank.
"
the main power
Solution
Set the temperature dial
to the required positioin.
Plug the power plug firmly
into the main
supply outlet
Set the steam level light
to " ". Then press
the steam setting button
to select the required
steam setting
Use the steam button only
after the indicator light
has turned off.
Pour out the remaining
water.
Clean the steam hole with
distilled water.
Fill water into the tank as
per earlier instructions.
power