Do you have a question about the SW-HF 5.1 6000 and is the answer not in the manual?
Questions and answers
Necron
February 1, 2025
How to turn off the speakers if my pc is not in use???
Me remote controller has no power on/off button at all and nothing similar, and i didnt find any power button on the sub either.....
Service Guide SW-HF 5.1 6000 Getting Started Conventions Used in the Guide Pay Special Attention: Instructions that are important to remember and may prevent mistakes. Caution: Information that, if not followed, may result in damage to the product. Safety Precautions...
Service Guide SW-HF 5.1 6000 Chapter 1. How to Handle Defective Returns 1.1 Overview Receiving Defective speaker from customers Verifying problems Proceeding Necessary tests Function NG Function OK Function NG Analyzing possible Malfunction cause Deciding & proceeding the Rectification methods...
Service Guide SW-HF 5.1 6000 1.2 Problems Item Problem Description 1.2.1 No power,LCD no light 1.2.2 No sound 1.2.3 Front channel no sound (including either FR or FL no sound) 1.2.4 Rear channel no sound (including either RR or RL no sound) 1.2.5...
Service Guide SW-HF 5.1 6000 *Attention Please follow the numbered sequence marked within parenthesis given in individual Flow chat in that this is the best-recommended sequence to rectify the problems. 1.2.1 No power,LCD unlighted No power, LCD no light Problem Analyze 1.
Service Guide SW-HF 5.1 6000 1.2.2 no sound No sound Problem CON PCB PCB broken, Assembled line 1. Defective IC2 on INPUT PCB dry-soldered or defectively 2. Defective IC1, IC2 on Analyze and short-circuited connected 3. Defective IC1, IC2, IC3, IC4, IC5, IC6, IC7, IC8, IC9, R28,...
Service Guide SW-HF 5.1 6000 Front channel no sound (including either FR or FL no sound ) 1.2.3 Front channel no sound (including either FR or FL no sound) Problem 1.defective IC1, PCB damaged, Poor connection of Defective components relating to IC1 and...
Service Guide SW-HF 5.1 6000 1.2.4 Rear channel no sound (including either RR or RL no sound) Problem or RL no sound) Rear channel no sound (including either RR Defective damaged, Poor connection of 1. Defective IC1, IC2 or other...
Service Guide SW-HF 5.1 6000 1.2.5 Center no sound Problem Center no sound Poor soldering, Poor connection Defective Defective IC1, Analyze and broken, or short center connection components relating to IC1 identify the circuit PCB speaker cables center audio and IC2 on INPUT PCB...
Service Guide SW-HF 5.1 6000 1.2.6 Woofer no sound Problem Woofer no sound 1. Defective IC1, IC2 or Poor connection Defective Power-supply Analyze and components relating to IC1 of sub speaker connection part dry-soldered, identify the and IC2 on INPUT PCB...
Service Guide SW-HF 5.1 6000 1.2.7 input no sound Problem input no sound Defective INPUT PCB soldering Defective input Analyze and components relating to points broken, RCA jack identify the inputs on INPUT PCB soldered short causes -circuited Check Check...
Service Guide SW-HF 5.1 6000 1.2.8 Remote control no use Problem Remote control no use Defective IR1, IC3, R1, Defective Low power of Defective broken, or its EC1, CC1 on CON soldering the battery conductive Analyze and other battery spring...
Service Guide SW-HF 5.1 6000 1.2.9. Noise Problem Noise Defective Broken or dry-soldered Abnormal power Vibration from too long dry-soldered filter capacitor/ diode supply or point flexible wire of the driver Analyze and components voltage of some units identify the...
Service Guide SW-HF 5.1 6000 1.2.10. LCD malfunction Problem LCD malfunction LCD improper or no display: CON PCB defective , dry-soldered, LCD text not clear: Analyze and or broken CON PCB defective , dry-soldered, or broken identify the LCD1, IC1 on CON PCB defective...
Service Guide SW-HF 5.1 6000 Chapter 5 Part list Center Ref. NO Description Part NO. Genius LOGO plate: M72 60*23*2MM EP75050198 cloth and cloth grill EP41010156 center driver unit, A-115-9, 4"Ω420W EP16040012 tweeter, A-52-2A, 2"8Ω10W EP16020043 center wood cabinet, W331.5*H160*D130MM...
Service Guide SW-HF 5.1 6000 Chapter 6. Important Notes 6.1 Packing requirement for sending the PCB assembly by post PCB assembly is a kind of sophisticated electronic circuit board. Well packing will be required when sending them by post. *Some sophisticated IC components are mounted on the PCB assembly;...
Need help?
Do you have a question about the SW-HF 5.1 6000 and is the answer not in the manual?
Questions and answers
How to turn off the speakers if my pc is not in use??? Me remote controller has no power on/off button at all and nothing similar, and i didnt find any power button on the sub either.....