Cleaning And Disinfection; Preparation; Cleaning - Pari Vortex Instructions For Use Manual
Non electrostatic holding chamber
Hide thumbs
Also See for Vortex:
- Instructions for use manual (174 pages) ,
- Instructions for use (2 pages) ,
- Manual (2 pages)
Table of Contents
Advertisement
Available languages
Available languages
4
CLEANING AND DISINFECTION
Regularly clean all product components and the accessories
used, if they are visibly dirty immediately after use.
Disinfect all individual parts at least once a week, in the event
of an acute infection, once a day.
4.1 Preparation
• Take the metered dose inhaler out of the connecting ring on
the inhalation chamber and close it with the protective cap
provided for this purpose.
• If applicable, detach the mask and the mask connector from
the mouthpiece.
• Disconnect the mouthpiece from the inhalation chamber.
• If applicable, remove the one-handed operation aid from the
inhalation chamber.
Info: The protective cap must be
open.
4.2 Cleaning
By hand
• Place all disassembled components in warm tap water with
a little dishwashing liquid for at least 5 min.
• Rinse all parts thoroughly in running water.
• You can remove excess water more quickly by shaking all
parts.
– 37 –
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Vortex and is the answer not in the manual?
Questions and answers
If I need to puffs do I squirt both in the vortex or one at a time?
You should actuate the metered dose inhaler just before inhalation, not both puffs at once. Each puff should be taken separately, followed by four breaths through the mask or mouthpiece.
This answer is automatically generated