Bosch PFS 3000-2 Operating Instructions Manual page 9

OBJ_BUCH-2024-004.book Page 25 Tuesday, April 21, 2015 11:16 AM
Problem
Spray material dripping at the
nozzle cap
No spray material coming out of the
nozzle cap
Tool will not spray
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Bosch Power Tools
Cause
Deposit of spray material on the nozzle cap
9/10, the nozzle needle 13 and the air cap 2
Nozzle loose
Sliding switch 24 is in position 
No pressure build-up in container 7 because
container not completely closed
Suction tube 15 loose
Nozzle cap 9/10 clogged
Suction tube 15 clogged
Ventilation hole 16 on suction tube 15
clogged
Container seal 14 missing or damaged
Spray material too viscous
Spray material dirty (lumps of paint)
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
English | 25
Corrective Measure
Clean the nozzle cap, nozzle needle and air
cap
Tighten the nozzle cap 9/10
Set the sliding switch 24 to "wood" or "wall"
application
Turn the container 7 towards the close
symbol until you hear the lock ring 6 en-
gage
Slide the suction tube all the way onto the
paint channel 17
Clean the nozzle cap
Clean suction tube
Clean the suction tube and the ventilation
hole
Slide a (new) container seal over the suction
tube into the groove
Dilute the spray material again and carry out
a test-spray run
Completely empty and clean the spray gun;
pour the spray material through the filling
sieve when filling
1 609 92A 162 | (21.4.15)