Guardzilla 180 Outdoor Quick Manual

Factory re-setting and power cycling your guardzilla camera

FACTORY RE-SETTING AND

YOUR GUARDZILLA CAMERA

______________________________________________________________

1) Factory reset your camera;

Power cycling your camera will retain all your settings. It's a good first step if you are experiencing issues

with your camera. A factory reset of your camera will remove all of your camera's settings and will require

you to set up your camera all over again.

______________________________________________________________

Make sure your camera is plugged in or has charged batteries.

Locate the re-set button on the top of the camera.

Press the RESET button and hold it down. Wait a few seconds for the LED light on the front of the

camera to blink red and blue, then release the button. Your camera will now go through the factory

reset process. When it finishes re-setting the LED will start blinking blue. The camera can now be added

back onto your network by following the directions in Step 4 below.

POWER CYCLING

This guide describes how to:

FACTORY RE-SETTING YOUR CAMERA

and

2) Power cycle your camera.

Guardzilla 180 Outdoor

Table of Contents

Need help?

Do you have a question about the 180 Outdoor and is the answer not in the manual?

Page 1 Guardzilla 180 Outdoor FACTORY RE-SETTING AND POWER CYCLING YOUR GUARDZILLA CAMERA ______________________________________________________________ This guide describes how to: 1) Factory reset your camera; 2) Power cycle your camera. Power cycling your camera will retain all your settings. It’s a good first step if you are experiencing issues with your camera.
Page 2 To add your camera back onto your new network follow these steps: STEP 1. On the upper right hand corner of your Guardzilla app’s home screen press the blue plus (+) sign. STEP 2. A carousel of product images will appear. Swipe your finger on the product images until the Outdoor Video image and title appears, then select Next and follow the directions for adding a camera back to your system.