1. Manuals
  2. Brands
  3. Systium Technologies Manuals
  4. Computer Accessories
  5. 555
  6. Assembly manual

Systium Technologies 555 Assembly Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SySTIUM
TECHNOLOGIES
®
Assembly Guide
Model 555

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 555 and is the answer not in the manual?

Questions and answers

Summary of Contents for Systium Technologies 555

  • Page 1 SySTIUM TECHNOLOGIES ® Assembly Guide Model 555...
  • Page 2 System • MODEL 555 ® SySTIUM TECHNOLOGIES MotherBoard Ready Radio Frequency Interference Notice (USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 3: Assembly Guide

    Assembly of a computer system using the Systium damage system parts. Model 555 enclosure t shall be done only by technically qualified personnel. Follow the instructions in the Before You Begin document “Model 555 Maintaining Regulatory Compliance”...

  • Page 4: Unpack The System

    Remove the plastic bag protecting the chassis. Save the bag for shipping the assembled computer. The Model 555 supports a number of different motherboards. A number of the assembly step details are different for each specific motherboard. This manual describes the steps required to complete the FIGURE 2 base system assembly task.

  • Page 5: Installing The I/O Shield

    System • MODEL 555 ® SySTIUM TECHNOLOGIES MotherBoard Ready Place the bezel to the side where it will not get The cover will easily pull away from the frame. scratched or damaged before reassembly. Refer to Figure 4. Installing the I/O Shield Locate the I/O shield supplied with the motherboard.
  • Page 6 System • MODEL 555 ® SySTIUM TECHNOLOGIES MotherBoard Ready Using the mounting screws supplied, mount the motherboard to the chassis. Ensure that FIGURE 7 the motherboard is fully inserted into the I/O PCI SLOTS shield while being tightened into place. Check that the fingers on the I/O shield are in contact with the connectors.
  • Page 7 EMI leakage that will result in the computer system not meeting the product's EMC compliance. A 3.5" EMI shield is not supplied with the Model 555 and must be ordered separately from Systium. Refer to the peripheral's user manual for instruction on peripheral configurations.
  • Page 8 Install Cover Lock Tab NOTE FIGURE 13 The Model 555 utilizes a power supply with an Energy Hazard on the 12V circuit. Compliance with CE requires installation of the cover lock tab and a lock or the use of the 6-32 TORX screw to secure the top cover.

  • Page 9: Power Up The System

    System • MODEL 555 ® SySTIUM TECHNOLOGIES MotherBoard Ready Slide the cover towards the front of the chassis. Ensure that all the mounting clips on the cover are fully engaged with the chassis. If the optional locking tab is installed, ensure that the tab is inserted into the slot in the cover.
  • Page 10 System • MODEL 555 ® SySTIUM TECHNOLOGIES MotherBoard Ready Test the complete operation of the computer using a known good computer functional test program such as Intel’s Test view. Install any required operating system or application software. NOTE The computer must have all the required warning and information lights functioning before shipping to the end user.

Table of Contents