Banana Pi BPI-M2+ User Manual page 49

BPI-M2+（BPI-M2 Plus）H3 quad cord single board computer
7 input udev rules:
note: please replace GROUP="text" text with your user group.
SUBSYSTEM!="usb_device", ACTION!="add", GOTO="objdev_rules_end"
#USBasp
ATTRS{idVendor}=="1f3a", ATTRS{idProduct}=="efe8", GROUP="text",
MODE="0666"
LABEL="objdev_rules_end"
save & reboot or just reboot udev server, so you can run LiveSuit.sh as a general
user,reboot udev commond :
sudo service udev restart
8 run burn tooling(home/usernamer/Bin )
./LiveSuit.sh
9 Click "Yes" button to burn eMMC
note: when burn eMMC, it will clean all document on eMMC.
10, when all is OK ,just rebbot BPI-M2+, and boot android image from eMMC flash.
How to burn android image to eMMC 49