Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Aeon Labs Manuals
  4. Security System
  5. Aeotec Siren Gen5 ZW080
  6. Installation and specification

Aeon Labs Aeotec Siren Gen5 ZW080 Installation And Specification

Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
Aeotec by Aeon Labs Siren Gen5.
Aeotec Siren Gen5 has been crafted to power connected lighting using Z-Wave Plus.
It is powered by Aeotec's Gen5 technology.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Aeotec Siren Gen5 ZW080 and is the answer not in the manual?

Questions and answers

Related Manuals for Aeon Labs Aeotec Siren Gen5 ZW080

Summary of Contents for Aeon Labs Aeotec Siren Gen5 ZW080

  • Page 1 Aeotec by Aeon Labs Siren Gen5. Aeotec Siren Gen5 has been crafted to power connected lighting using Z-Wave Plus. It is powered by Aeotec’s Gen5 technology.

  • Page 2: Quick Start

    Get to Know your Siren. · Action Button · 106dB speaker system · Safety LEDs · Network LED Important safety information. Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law.
  • Page 3 Pairing your Siren Gen5 into your existing Z-Wave network. 1. Place your gateway or controller into Z-Wave pair or inclusion mode. (Please refer to your controller/gateway manual on how to do this) 2. Press the Action Button on your Siren Gen5, and its LED will blink rapidly to indicate that it is communicating.
  • Page 4 Changing Sounds and Volume. You may want to change your sound and volume of your Siren Gen5 to cater to your application. There are 5 separate sounds, and 3 volume settings. You must use Parameter 37 to change the tone and volume of the Siren. In order to make this setting change, your gateway must support the Configuration Command Class otherwise this is not possible.
  • Page 5 Below image reflects the hex value 0x301 conversion to decimal which is equivalent to 769 decimal. Reset your Siren. This method is not fully advised unless your gateway has failed, and you do not yet have another gateway to perform a general unpair on Siren Gen5. To do this, follow the steps below: 1.

  • Page 6: Technical Specifications

    Technical specifications Name: Siren Gen5 Model Number: ZW080 Repeater: Yes Beaming: Yes AES128 Secure Encryption: Yes Built-in Lithium Battery: 430 mAh. Alarm Power: 1.7W. Max Standby Power: 0.7W. Max Volume: 106dB. Operating humidity: 8% to 80%. Operating temperature: 0°C to 40°C 32°F to 104°F.
  • Page 7 Supported Commands. Non-Secure Secure COMMAND_CLASS_ZWAVEPLUS_INFO V2 COMMAND_CLASS_BASIC V1 COMMAND_CLASS_SWITCH_BINARY V1 COMMAND_CLASS_CONFIGURATION V1 COMMAND_CLASS_ASSOCIATION V2 COMMAND_CLASS_ZWAVEPLUS_INFO V2 COMMAND_CLASS_ASSOCIATION_GRP_INFO V1 COMMAND_CLASS_VERSION V2 COMMAND_CLASS_MANUFACTURER_SPECIFIC V2 COMMAND_CLASS_MANUFACTURER_SPECIFIC V2 COMMAND_CLASS_POWERLEVEL V1 Node Info Frame COMMAND_CLASS_SECURITY V1 COMMAND_CLASS_SCENE_ACTIVATION V1 COMMAND_CLASS_MARK V1 COMMAND_CLASS_SCENE_ACTUATOR_CONF V1 COMMAND_CLASS_DEVICE_RESET_LOCALLY V1 COMMAND_CLASS_VERSION V2 COMMAND_CLASS_HAIL V1 COMMAND_CLASS_FIRMWARE_UPDATE_MD V2 COMMAND_CLASS_SECURITY V1...