Troubleshooting
Error message
No Media
Unformat
Media Full
Track Full
Write Inhibited
File Not Found
Track Not Found
Already Exists
Err Media XX
VBR
Not Allowed
Not Available
No Mark
Some files are skipped
ALC
Registered
76
Cannot detect media.
The media is formatted in an unsupported format. Format the media on DN-900R or
set the format to FAT16 or FAT32.
The remaining space on the media is running low. Replace the media with a new one
or delete files that are no longer required.
The number of files on the selected media exceeds 2000. Recording cannot be
performed if the number of files exceeds 2000. Replace the media with a new media
or delete unneeded files.
The selected media is write-prohibited. Remove the write-protection from the media.
Target file does not exist. Check the file.
The target track does not exist. Check the media.
A file with the same name already exists.
•
Copy, Move, Divide: Check the folder.
•
Rename: Change the file name before entering the name.
Not supported on this unit. Replace the media.
This error message appears when a VBR file search is performed. Search cannot be
performed on VBR files. When the selected track is VBR format, the estimated
remaining time is displayed.
This appears when an invalid operation is performed. The operation may be disabled
due to other setting items such as the preset menu, etc. Check the details of the
operation.
There are no marks for the mark jump. Set marks.
There is a file with the same name in the copy or move location.
Files with the same name cannot be copied or moved.
The Rec Level cannot be changed when the ALC settings are enabled. Turn the ALC
settings off to change the Rec Level.
The file that have been added to a program, hot start, or timer playback list. Files
registered to these lists cannot be edited.
Cause/Solution
Need help?
Do you have a question about the DN-900R and is the answer not in the manual?
Questions and answers