Table of Contents
Advertisement
Quick Links
MaxAir25 B/W
08/54154/0 Issue 3
As with all portable heating appliances: This product is suitable only for well insulated spaces or occasional use.
The product complies with the European Safety Standards EN60335:2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014:1,
EN55014:2, EN61000:3-2 and EN61000:3-3 which cover the essential requirements of EMC Directive 2014/30/EU and the LVD Directive 2014/35/EU.
Advertisement
Table of Contents
Related Manuals for Dimplex MaxAir25 B
Summary of Contents for Dimplex MaxAir25 B
- Page 1 MaxAir25 B/W 08/54154/0 Issue 3 As with all portable heating appliances: This product is suitable only for well insulated spaces or occasional use. The product complies with the European Safety Standards EN60335:2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014:1,...
- Page 2 Installation and Operating Instructions IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY BEFORE USE AND RETAINED FOR FUTURE REFERENCE IMPORTANT SAFETY ADVICE CHOKING HAZARD: The remote control for this DO NOT use the heater in the immediate surroundings unit contains a small battery. Keep the remote of a bath, a shower or a swimming pool.
- Page 3 Dimensions 694mm 270mm 270mm...
- Page 4 Assembly • Open the packaging and remove the product. • The glass base is packaged unassembled from the product. • Remove the fixing nut from the bottom of the product. • Slide the glass base into place. • Screw the fixing nut on to fix the glass base into position. •...
- Page 5 Standby • When the appliance is plugged in there will be an audible beep. Standby mode Power going to the product but the product is not turned ON. Once the standby button has been pressed the product will turn ON and STANDBY icon will turn OFF.
- Page 6 Remote Bluetooth Pairing/Operation The appliance can be controlled remotely using a smartphone or similar device. To facilitate this remote operation it is necessary to first download the Dimplex app. The app is available on both android and IOS devices and is available free from the Apple or Android App store.
-
Page 7: Remote Control Storage
Remote Control Storage Remote Control Standby Decrease Increase Heating Speed Mode (Cooling Only) Runback Oscillation Timer Changing Remote Batteries Hot: Do Not Touch... -
Page 8: Heating Mode
Heating Mode When set to 5ºC the Frost Protect symbol appears. The product will cycle on and off to maintain a temperature of approximately 5ºC to give a degree of protection against frost conditions. Decrease Temperature Increase Temperature (Min 5ºC/41ºF) (Max 30ºC/86ºF) Cycle through Heat modes... - Page 9 Runback Timer The heater is fitted with a Runback Timer feature which can be set in either cooling or heating modes. The Runback Timer range is 1 to 12 hours. To set Runback Timer please follow the directions below: Has Runback Timer been set previously? Decrease Runback Increase Runback time (stops at 0hr)
-
Page 10: Sound On/Off
Oscillation Oscillation ON Product will oscillate and icon will be visible Oscillation OFF Product will be static and icon will be off Press to cycle Oscillation On and OFF • Oscillation feature provides Heating and Cooling effect across a wide area. This is particularly useful for providing maximum coverage for Heating or Cooling effect quickly and efficiently. -
Page 11: Air Filter
• To clean the filter remove the filter cover from the back of the heater and gently shake outside. • Alternatively, you can place in warm water and remove to dry naturally for a 24 hour period. • Replacements are available to purchase from www.dimplex.co.uk/spares... -
Page 12: Temperature Units
Temperature Units Press and hold for 2 seconds to Press and hold for 2 seconds to change temperature units to 0F. change temperature units to 0C. • Temperature units on the product can be changed between Celsius (0C) and Fahrenheit (0F). •... -
Page 13: Supplementary Information
To bring the heater back into operation, remove the cause of Model Identifier(s): MaxAir25 B/W overheating then unplug the unit from the Heat output electricity supply for a few minutes. When Nominal heat output... -
Page 16: Warranty
A brand of the GDC Group Limited, trading as Glen Dimplex Heating & Ventilation If you have any questions about what the Dimplex Warranty covers and does not cover or how to claim under the Dimplex Warranty, please contact us:...
Need help?
Do you have a question about the MaxAir25 B and is the answer not in the manual?
Questions and answers