Page 1
Plug In Heater Model Number: RHPH2001 220-240V AC 50Hz 500W This product is only suitable for well insulated spaces or occasional use For Customer Services & Spare Parts please call 0345 209 7461 https://mda.russellhobbs.com Or visit us at PLEASE RETAIN...
CONTENTS Page(s) Safety Instructions and Electrical Safety 3 – 6 Positioning Feature Diagram Control Panel Using your Plug In Heater 9 - 11 Cleaning and Care Problem Solving Guarantee and Customer Services Connection to the Mains Supply Specification Notes 17 - 19 Disposable Information Page 2...
SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should always be observed, including the following: • Read all instructions. • Check that the mains voltage corresponds with the rating on the appliance. • The appliance must not be left unattended while it is connected to the mains supply.
Page 4
SAFETY INSTRUCTIONS • Never place flammable objects or clothing on top of the appliance. • Allow a 30cm safe area around the appliance on the top and bottom, 50cm safe area on the sides and a 150cm safe area at the front.
Page 5
SAFETY INSTRUCTIONS • This product is only intended for heating. • Warning: It is hazardous for anyone other than a competent person to carry out any service or repair operation which involves the removal of a cover which gives protection against exposure to electrical parts.
Page 6
SAFETY INSTRUCTIONS • Warning: In order to avoid overheating, do not cover the heater • Warning: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
SAFETY INSTRUCTIONS Positioning • The heater can be positioned in the upright position (Control panel is at the top): • The distance between the heater bottom and the ground should be more than 30cm. • The distance between the side of the heater and the wall or any other object should be more than 50cm.
FEATURE DIAGRAM 1. Control panel & display 4. Power indicator light 2. Buttons 5. ON/OFF switch 3. Air outlet For Customer Services & Spare Parts please call 0345 209 7461 Or visit us at https://mda.russellhobbs.com Page 8...
CONTROL PANEL On/Standby Speed Fan mode selection (low/high) Temp + Increase the temperature setting Temp - Decrease the temperature setting Timer Timer setting function (0 – 12 hours) USING YOUR PLUG IN HEATER Heats up to 10 square metre (107 square foot) room 1.
USING YOUR PLUG IN HEATER 2. Press the ‘ON/OFF’ switch on side of the unit to “On” position. The heater will turn on. 3. Press the ‘ ‘ button, the heater start running 4. Press the ‘Temp. +’ button to increase the temperature setting or press the ‘Temp.
Page 11
USING YOUR PLUG IN HEATER Safety Protective Devices The appliance is fitted with an over heat protection system • Overheat protection - the power to the heating elements will automatically cut off if the temperature of the heating elements exceeds a certain limit. In the event of overheating, the heater will stop operating.
CLEANING AND CARE WARNING: Electrical Shock Hazard. Before you clean the appliance, disconnect the mains plug from the wall socket. • Allow the appliance to cool down completely before cleaning. • Do not immerse cord, plug or appliance in any liquid or allow moisture to come into contact with electrical parts.
PROBLEM SOLVING My appliance does not work when I turn it on: 1. Check that your appliance is plugged in and the power is turned on at the mains socket. 2. Try another mains socket. 3. Check the appliance is in an upright position. 4.
GUARANTEE AND CUSTOMER SERVICES At Russell Hobbs, we take all our customer feedback seriously. Feel free to contact our Customer Service Team, on 0345 209 7461, who will be more than happy to assist you. This product is guaranteed for 12 months from the date of the original purchase.
CONNECTION TO THE MAINS SUPPLY This appliance is designed to operate from a mains supply of 220-240V~50Hz. Check that the voltage marked on the product corresponds with your supply voltage. How to change the fuse 1. Slot the end of a screwdriver into the recess in the fuse holder of the plug.
SPECIFICATION Model number RHPH2001 Rated voltage 220V - 240V ~ 50Hz Power consumption 500W Product dimensions (CMS) (H)18 x (W)10.6 x (D)11.4 Model number RHPHP2001 Item Symbol Value Unit Item Unit Heat output Type of heat input, for electric storage local space heaters only...
Or visit us at https://mda.russellhobbs.com Revision 1 Model Number: RHPH2001 This symbol is known as the 'Crossed-out wheelie bin Symbol'. When this symbol is marked on a product/batteries, it means that the product/batteries should not be disposed of with your general household waste.
Need help?
Do you have a question about the RHPH2001 and is the answer not in the manual?
Questions and answers
I have been told that if I press the button under the plug pins, they can swivel the plug, is this correct?