Call Alert; Call Alert Decode; Call Alert Encode - Motorola GTX User Manual

CALL ALERT

Call Alert Decode

This feature allows an individual mobile unit in a
system to receive a Call Alert or page. When the
mobile unit receives the Call Alert, the display
shows:
The radio will beep every four seconds until any
key/PTT is pressed. Call Alert pages will not be
received when the radio is engaged in voice con-
versation, has been turned off, or is out of the sys-
tem range.
If your unit is equipped with optional horn/lights
alert, see the description of Horn/Lights given on
page 21.
GTX Mobile Radio

Call Alert Encode

The Call Alert Encode Feature allows the dispatch-
er or supervisory unit to Call Alert or page up to
eight mobile units.
To send a Call Alert page, press the
ton until the display shows:
To select a mobile ID from the ID list, press the
talkgroup or talkgroup
ID is identified as CA1 through CA8. Select the
desired ID and press the PTT switch momentarily
to send the CALL Alert. The radio will beep once to
indicate that Call Alert has been sent. When the
Call Alert has been acknowledged, the display will
show:
(Call) but-
Call
button. Each mobile
68P80905Z40-O
page 11