Advertisement
DO NOT PRINT with INSTRUCTIONS
PART NUMBER: EMCSA00911
DESCRIPTION: INSTRUCTION SHEET, EU2C
SPECIFICATIONS: Prints 8.5 x 11, portrait. Two side, one color: BLACK ink.
PAGINATION: 8.5" X 11 portrait.
REQUIRED INSTRUCTION SHEETS for EU2C models
PART #
INSTRUCT SHEET DESCRIPTION
EMCSA00911
EMCSA00795
ABL LED WARNING
EMCSA00912
SD INSTRUCTIONS
DATE
9.12.18
REV. B: Removed SD HO wiring diagram - ABL not offering SD and hO together at this time.
8.06.18
REV. A: Initial Release
PAGE: 0 of 4
DO NOT PRINT with INSTRUCTIONS
Information below is for LITHONIA documentation purposes only.
DO NOT include this page in the printing of this instruction sheet.
REV
EU2C
B
A
One Lithonia Way, Conyers GA 30012
DATE
09.12.2018
08.06.2018
CHANGE DESCRIPTION
Phone: 800-334-8694
www.lithonia.com
CONFIGURATIONS
HO
STANDARD UNIT
X
X
X
X
SDT
X
X
BY
RRB
RRM
Advertisement
Table of Contents
Related Manuals for Lithonia Lighting EU2C
Summary of Contents for Lithonia Lighting EU2C
- Page 1 DO NOT include this page in the printing of this instruction sheet. PART NUMBER: EMCSA00911 DESCRIPTION: INSTRUCTION SHEET, EU2C SPECIFICATIONS: Prints 8.5 x 11, portrait. Two side, one color: BLACK ink. PAGINATION: 8.5” X 11 portrait. REQUIRED INSTRUCTION SHEETS for EU2C models CONFIGURATIONS PART # INSTRUCT SHEET DESCRIPTION DATE...
-
Page 2: Installation
INSTALLATION INSTRUCTIONS for Lithonia Lighting EU2C Models LED DUAL HEAD EMERGENCY LIGHTING FIXTURE READ AND FOLLOW ALL SAFETY INSTRUCTIONS WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS AND WARNINGS MAY RESULT IN DEATH, SERIOUS INJURY OR SIGNIFICANT PROPERTY DAMAGE. For your protection, read and follow these warnings and instructions carefully before installing or maintaining this equipment. -
Page 3: Installation Instructions
INSTALLATION INSTRUCTIONS J-BOX MOUNTING: 1. Feed fixture leads through the back plate and connect to AC power supply (Fig A, page 1). For 120V use black and white wires and for 277V, use red and white wires. 2. Attach back plate to J-Box and secure with screws. 3. -
Page 4: Read And Follow All Safety Instructions
TROUBLESHOOTING: Condition - The emergency lights do not operate 1. If the charge indicator light is OFF: Check that the circuit breaker for AC supply is ON. 2. If the charge indicator light is ON: Check that battery is properly connected. If problem persists, Replace battery. If remote lamps (where appli- cable) are connected to the equipment, then turn OFF the AC supply and disconnect the remote circuit wires from the equipment. - Page 5 INSTALLATION INSTRUCTIONS CHARGER BOARD AC INPUT CONNECTOR (MOUNTING PLATE) 277V 120V BLACK WHITE YELLOW(+) WHITE BLUE(-) YELLOW(+) WHITE BLUE(-) LAMP BLACK LAMP BATTERY TEST READY One Lithonia Way, Conyers GA 30012 Part No. EMCSA00911, REV B Phone: 800-334-8694 2018.09.12 www.lithonia.com SAVE THESE INSTRUCTIONS PAGE: 4 of 4 and deliver to owner after installation...
Need help?
Do you have a question about the EU2C and is the answer not in the manual?
Questions and answers