Network Settings - Panasonic TH-86CQ1U Operating Instructions Manual

Network settings

Selects the method with which to control the TV from the
computer.
[Network settings] submenu will be displayed.
Picture
Audio
SERIAL IN/LAN select
LAN setup
Move Select
ENTER
■
[SERIAL IN/LAN select]
RS-232C or LAN function is enable. To control the TV
via RS-232C, set [SERIAL IN/LAN select] to [SERIAL
IN].
Note
●
You cannot use RS-232C and LAN control
simultaneously.
■
[LAN setup]
Controls via LAN using the LAN terminal.
Picture Audio
SERIAL IN/LAN select
LAN setup
Move Select
ENTER
Picture Audio
Network information
DHCP
IP address
Subnet mask
Gateway
Set
Move Select
ENTER
TV Setup
SERIAL IN
LAN
Return Exit
MENU EXIT
TV Setup
SERIAL IN
LAN
Return Exit
MENU EXIT
TV Setup
Use
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000
Return Exit
MENU EXIT
[Network information]
Picture Audio
DHCP
IP address
Subnet mask
Gateway
MAC address
[DHCP], [IP address], [Subnet mask], [Gateway]
Press < > to set [Use] / [No Use] of [DHCP].
When [No Use] is selected, IP address and other
settings can be set manually.
[DHCP]:
[Use]: Use Dynamic IP address.
[No Use]: Use Static IP address, Subnet mask,
and Gateway.
[IP address]:
Enter IP address when [DHCP] is [No Use].
[Subnet mask]:
Enter Subnet mask when [DHCP] is [No Use].
[Gateway]:
Enter Gateway address when [DHCP] is [No Use].
Note
● When [DHCP] is set to [Use], others will be
displayed in grey.
Entering numbers
Picture Audio
Network information
DHCP
IP address
Subnet mask
Gateway
Set
Move Select
ENTER
1. Select the address and press <ENTER>.
2. Select digits with the cursor buttons <
and < ∙ >.
3. Change numbers with the cursor buttons
< / > and the numeric buttons <0 - 9>.
4. Press <ENTER>.
TV Setup
Use
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000
Return Exit
MENU EXIT
TV Setup
Use
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000
Return Exit
MENU EXIT
/ >
English
37