Table of Contents
Advertisement
WIFI TROUBLE SHOOTING
PROBLEM
My phone has
searched
WiFi
of
dash cam but
unable
connect?
Can't connect
two phones at
once?
How to reset
Wifi password?
Must
download the
videos to my
phone? Can I
check
them
directly?
Real-time
video playback
on phones is
not smooth
I can't connect
1. Make sure no other device or phone is
connected to the dash cam WiFi. The
dash cam does not support connection
the
with multiple devices at the same time.
the
2.Disconnect the Wifi and reconnect
again.
to
3. Please restart your phone and try again.
4. Reset the dash cam if the above step
does not work.
One dash cam wifi can only support one
phone to connect. It does not support
simultaneous connection of multiple
devices.
You can change the wifi ssid and wifi
password in setting.
I
Users of the IOS system can play back the
video directly. The Android system user
cannot directly play back the video, and
the video needs to be downloaded to the
mobile phone.
The distance between the phone and the
dashcam is too far. It is the best to
connect within 3m/9.8ft.
This WiFi is only used for data transfer of
SOLUTION
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Q1 and is the answer not in the manual?
Questions and answers
I have bought a second hand vehicle that has a Peztio 1 with it but I can’t set it up. No manual came w it.
1. Power the Device: Use the car charger (5V 1A) to connect the dash cam to the vehicle’s cigarette lighter. Keep it plugged in for normal operation.
2. Insert Memory Card: Ensure the memory card is correctly inserted before use. Format it through the setup menu if needed.
3. Mount the Dash Cam: Clean the front windshield, remove the protective sticker, and attach the device securely.
4. Turn on the Device: The dash cam will start recording automatically when powered.
5. Connect to Wi-Fi (Optional):
- Download the "GoPlus Cam" app from the App Store (iOS) or Play Store (Android).
- Turn on the dash cam, press the power button (without recording) to activate Wi-Fi mode.
- On your phone, search for the Wi-Fi network named GPLUSPRO and enter the password 12345678.
- Open the "GoPlus Cam" app and connect to the dash cam.
6. Adjust Settings: Access the system settings to configure options like date/time, resolution (1080P or 720P), loop recording, motion detection, and more.
7. Start Recording: The dash cam will automatically record and save files to the memory card. Use loop recording to overwrite old files when storage is full.
This answer is automatically generated