Using The Control For Hdmi; Function; Using The Control For Hdmi Function - Sony HT-G700 Operating Instructions Manual

C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\080HDM.fm
010COV.book Page 31 Wednesday, September 18, 2019 1:58 PM

Using the Control for HDMI

Function

Using the Control for
HDMI Function
Connecting a device such as a TV or Blu-
ray Disc player compatible with the
Control for HDMI function* using an
HDMI cable enables you to easily
operate the device by a TV remote
control.
The following functions can be used
with the Control for HDMI function.
• System Power Off function
• System Audio Control function
• eARC/ARC (Enhanced Audio Return
Channel/Audio Return Channel)
• One-Touch Play function
• HDMI Standby Through power saving
setting
Note
These functions may work with devices
other than those manufactured by Sony,
but operation is not guaranteed.
* Control for HDMI is a standard used by
CEC (Consumer Electronics Control) for
allowing HDMI (High-Definition
Multimedia Interface) devices to control
each other.
Preparing to Use the Control
for HDMI Function
Set [HDMI] - [CONTROL FOR HDMI] is set
to [ON] (page 36). The default setting is
[ON].
Enable the Control for HDMI function
settings for the TV and other device
connected to the system.
Tip
If you enable the Control for HDMI
("BRAVIA" sync) function when using a TV
manufactured by Sony, the Control for
HDMI function of the system is also
enabled automatically.
When the Control for HDMI settings are
changed to on, [DONE] appears in the front
panel display.
System Power Off Function
When you turn off the TV, the system
will turn off automatically.
Note
The connected device may not turn off
depending on the status of the device.
System Audio Control
Function
If you turn on the system while you are
watching the TV, the TV sound will be
output from the speakers of the system.
The volume of the system can be
adjusted using the TV remote control.
When you turn on the TV, the system is
turned on automatically and the TV
sound is output from the speakers of
the system.
Operations can also be made by the
TV's menu. For details, refer to the
operating instructions of your TV.
Notes
• The number for the system's volume level
is displayed on the TV screen depending
on the TV. The volume number displayed
on the TV may differ from the number on
the front panel display of the system.
• Depending on the settings of the TV, the
System Audio Control function may not
be available. For details, refer to the
operating instructions of your TV.
• Depending on the TV, if the TV sound was
output from the speakers of the TV the
previous time you watched the TV, the
system may not turn on by interlocking
masterpage:
Right
31
US
HT-G700
5-013-058-11(1)