Connecting Via Bluetooth; Pairing A Bluetooth Device - Audio Technica ATH-CK3TW User Manual

Connecting via Bluetooth

To connect the product to a Bluetooth device, the product needs to pair (register) with the device.

Pairing a Bluetooth device

• Read the user manual for the Bluetooth device.
• Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.
• To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the
confirmation tone and voice guidance.
1. Remove the headphones (L (left) and R (right)) from the charging case.
• The indicator lamps will flash in white.
2. Use your Bluetooth device to begin the pairing process and search for the product.
When your Bluetooth device finds the product, "ATH-CK3TW" will be displayed on the device.
• For information about using your Bluetooth device, refer to the device's user manual.
• If you pair again after pairing once, "ATH-CK3TW" or "L_ATH-CK3TW" may be
displayed. Select either one to pair.
3. Select "ATH-CK3TW" to pair the product and your Bluetooth device.
• Some devices may ask for a passkey. In this case, enter "0000". The passkey may
also be called a passcode, PIN code, PIN number, or password.
• The product plays a confirmation tone and voice guidance when pairing is
complete.
9
12:00 100%
Bluetooth
ON
ATH-CK3TW