D-Link DAP-1330 Technical Support Setup Procedure

Hide thumbs Also See for DAP-1330:

Technical Support Setup Procedure

How to configure DAP-1330 as Access Point with non-default

wireless SSID?

(Note: Please ensure the device LED is blinking orange colour before you do

setup.

If it is not blinking in orange colour, follow the guide on page 3 on how to reset

the device before follow the guide to setup.)

Step 1: Copy down the wireless name and password that was on the sticker of the device.

Step 2: Plug DAP-1330 direct to power outlet.

Step 3: Click on the Computer Icon on the right bottom side of the Windows. Select the Wireless

network name that was copy down.

Step 4: Enter the Wifi Password which had copy down earlier on. Click on OK.

Page | 1

Table of Contents

Need help?

Do you have a question about the DAP-1330 and is the answer not in the manual?

Page 1 Technical Support Setup Procedure How to configure DAP-1330 as Access Point with non-default wireless SSID? (Note: Please ensure the device LED is blinking orange colour before you do setup. If it is not blinking in orange colour, follow the guide on page 3 on how to reset the device before follow the guide to setup.)
Page 2 Technical Support Setup Procedure Step 5: Open Internet Explorer and enter http://192.168.0.50 on the URL bar. Step 6: Click on X. Step 7: Click on OK. Step 8: Click on Settings and select Extender. Step 9: Select Ethernet for Existing Network. Step 10: 2.4Ghz Extended Wi-Fi a) Give a different Wi-Fi Name in the box beside Wi-fi Name (SSID).
Page 3 Step 11: Click on Save. Step 12 a) Plug DAP-1330 direct to power outlet. b) Connect LAN Cable from DAP-1330 to LAN port of the Router. Step 13: Use computer to connect to the wireless you had setup. --- END --- How to reset DAP-1330? Step 1: Plug DAP-1330 direct to power outlet.