Advertisement
Advertisement
Table of Contents
Related Manuals for Confidence Fitness Power Plus
Summary of Contents for Confidence Fitness Power Plus
- Page 1 Confidence Fitness Power Plus Treadmill...
-
Page 2: Parts List
M6* Inner Hexagonal Spanner M6* 40 Inner Hexagonal Screw M12* 50 Inner Hexagonal Screw Emergency Stop Magnet Toe Cap M5*10 Screw Locking Pin Technical Specifications Power Plus Electric Treadmill Product Name 220-240V Voltage Rate 50/60HZ Rated Frequency 600W Rated Power... -
Page 3: Warning And Safety Information
3. Should any electrical work be required on the Confidence Power Plus Treadmill please ensure it is carried out by a qualified electrician. 4. The Confidence Power Plus Treadmill is designed for indoor use only. It is not to be used outdoors. - Page 4 Assembly Instructions 1. Open the box and remove the Confidence Power Plus Treadmill from the box. 2. Remove the plastic from the Confidence Power Plus Treadmill. 3. Position the handrail and insert the screw in hole provided. 4. Mount the Toe Cap provided and align it with the screw hole. Fix it in place with the 1...
- Page 5 5. Take the control panel and position onto the handrail. Fix in place with M6 inner hexagonal screw and tighten securely. 7. Insert the Magnet Emergency Connector onto the control panel (photo 6). 8. Screw the Locking Pin into position (photo 7).
-
Page 6: Control Panel
Control Panel 1. Plug the Confidence Power Plus Treadmill into the main power socket and place the Emergency Stop Magnet on the Emergency Stop Switch. 2. The control panel will beep to indicate that the panel is on and in the standby mode. -
Page 7: Adjusting The Running Belt
2. To straighten/adjust the running belt turn the adjusting bolt on either side of the base, see figure 1 and 2. 3. Do not allow for the running belt to catch the sides of the Confidence Power Plus Treadmill as this will tear the belt. - Page 8 Folding Away the Confidence Power Plus Treadmill 1. Turn off the Confidence Power Plus Treadmill. Remove from the mains power supply 2. Loosen the Locking Pin. 3. Lift up the base and tell the hole in the base aligns with the hole in the frame work and...
- Page 9 Preset Speed and Running Time P1----The default time is 10 minutes Order Speed 1.0 3.0 5.0 7.0 5.0 3.0 60 60 60 240 60 60 Work time(seconds) P2----The default time is 10 minutes Order 2.0 3.0 4.0 5.0 6.0 5.0 3.0 2.0 3.0 Speed 30 30 30...
- Page 12 Confidence Fitness UK & Europe www.shop247.co.uk Units 3 & 4 Lower Park Farm Storrage Lane Alvechurch, Worcestershire B48 7ER United Kingdom Telephone: 01527 598388 www.shop247.com Suite 110-120 16 Sunset Way Henderson, Nevada 89014 Telephone: 1-800-603-0004 AUS/NZ www.shop247.com.au Unit 7/350 Edgar Street Condell Park, NSW 2018 Australia Phone: 1300 795 828...
Need help?
Do you have a question about the Power Plus and is the answer not in the manual?
Questions and answers
Can you please tell me whether or not it is possible to purchase a replacement Emergency Stop Switch for my Confidence Fitness Power Plus Treadmill ? If so, how do I arrange it ? Thank You.
Treadmill on an incline how do you get it to a flat walk
how do i know if it is set to MPH or KMPH?