Crestron IDOC-PAD-LCA-DSC Do Manual

DO GUIDE
IDOC(I)-PAD-LCA-DSC/IDOC-PAD-LCA2-DSC
iPanel Table Dock for iPad Air
®
The Crestron IDOC-PAD-LCA-DSC, IDOCI-PAD-LCA-DSC,
®
and IDOC-PAD-LCA2-DSC iPanel Table Docks feature similar
operation. For simplicity within this guide, the term "iPanel" is
used except where noted. Similarly, "iPad" is used to denote
iPad Air and iPad Air 2. The iPad device is sold separately.
®
For the iPad Air, use model IDOC-PAD-LCA-DSC or
IDOCI-PAD-LCA-DSC. For the iPad Air 2, use the
IDOC-PAD-LCA2-DSC.
DO Install the Device
Required Tools
The following are required to prepare the iPanel for use.
• #2 Phillips screwdriver
• Apple Lightning connector to USB cable (included)
® ®
Assembly
1. Lift and remove the plastic cover from the iPanel.
2. Remove the cable holder.
Lift here.
Devices
®
3. Use the Phillips screwdriver to remove the screws and
washers that hold the metal plate in place, and remove the
metal plate.
4. Stretch the Lightning
possible, and thread the connector through the cable slot
on the rear of the iPanel.
Cable Channel
5. Snap the Lightning connector of the Lightning to USB
cable in the cable holder.
DO Check the Box
QTY PRODUCT
1 Cable, Lightning
®
1 Adapter, Power, 12 W
Item for IDOCI-PAD-LCA-DSC-B/W-S Only
1 Adapter Kit, World Travel
Remove
screws and
washers.
connector to USB cable as flat as
®
Cable
The plastic of the Lightning
connector must be placed
within the connector brackets.
COLOR
Connector to USB, 3' (1 m) White
White
6. Place the cable holder containing the Lightning to USB
cable in the iPanel.
7. Starting from the connector, loosely place the cable in the
cable channel and press it into the channel to secure it.
NOTE: The cable must be completely pressed into the
channel so that it is flush with the shorter wall of the cable
channel.
Cable Channel Cable
8. Replace the metal plate and secure it to the iPanel using
the screws and washers removed in step 3.
NOTE: When replacing the metal plate, slide the metal
plate between the cable holder's top prong and the bottom
prongs as shown in the following diagram.
Metal
Plate
Bottom
Prong
Lightning
Connector
Top
Prong
Bottom
Prong
PART NUM.
2038024
2038025
2040754