Coolproducts Rennrad Owner's Manual page 70

14 Secure the brake mount torque arm back on the
frame. Do not tighten the screw yet.
15 Tension the chain by pulling back the rear wheel. It
should be possible to move the chain approx. 10 mm
up- and downwards.
16 Tighten the two axle nuts and check that the chain is
correctly tensioned and that the rear wheel is at a uni-
form distance from the frame on both sides.
(Tightening torque 25 Nm)
17 Now tighten the bolt to secure the brake mount to the
frame.
71