Reset Configuration To Defaults+Pair With Pc Terminals Hid Bluetooth Mode - Symcode R40 User Manual

Initialization Setting
During usage,if you scan other set-up barcode by mistake and the
scanning cannot perform as normal way, you can scan the initialization
set-up barcode to revert.
Bluetooth Pairing Steps：
Pair with operating system （Including Android、 ios、 win system）
that with Bluetooth function ：
A: Start the scanner and long press for 8 seconds or scan the bluetooth
pairing setup barcode to enter the bluetooth search mode.
B: Turn on Bluetooth in the device to detect bluetooth device
named with "Barcode Scanner HID".Click "Barcode Scanner
HID" to enter pairing status.: If pair successfully, you will hear a beep.
Note: When the scanner enters the state of matching and it does not
pair withbluetooth successfully within 1 minute, there is 2 times long
low sound indicated failing match and return to scanning mode.
2.4G/Bluetooth Wireless Barcode Scanner
&Version Information
Initialization Setting
Display Version Information
HID Pair Set-up Barcode
11