Interior Lights - Fiat 500X Owner's Handbook Manual

"Lane Change" function
If you wish to signal a lane change while
running, place the left stalk in the
unstable position for less than half a
second.
The direction indicator on the side
selected will flash five times and then
switch off automatically.
HEADLIGHT ALIGNMENT
ADJUSTMENT
Headlight alignment
corrector
The headlight alignment corrector
operates with ignition device at MAR
and dipped headlights on.
To adjust rotate ring nut A fig. 28.
28
❒ Position 0: one or two people on the
front seats;
❒ Position 1: 4 or 5 passengers
❒ Position 2: 4 or 5 passengers + load
in the boot
❒ Position 3: driver + maximum
admissible load stowed only in the
boot.
IMPORTANT Check the headlight
alignment each time the weight of the
load transported changes.
INSTRUMENT PANEL AND
CONTROL BUTTON
GRAPHICS BRIGHTNESS
ADJUSTMENT
With side lights or headlights on, turn
ring nut B fig. 28 upwards to increase
light brightness of the instrument panel
and of the control button graphics, or
turn the ring nut downwards to
decrease it.
WARNING
18) The daytime running lights are an
alternative to the dipped beam headlights
for driving in countries where it is
compulsory to have lights on during the
day; where it is not compulsory, the use of
daytime running lights is permitted.
19) Daytime running lights cannot replace
F1B0038C
dipped beam headlights when driving at
night or through tunnels. The use of
daytime running lights is governed by the
highway code of the country in which
you are driving. Comply with legal
requirements.

INTERIOR LIGHTS

FRONT ROOF LIGHT
Switch A fig. 29 is used to switch on/off
the roof light bulbs.
Switch A positions:
❒ central position: lights B and E switch
on/off when the doors are opened/
closed;
❒ pressed to the left (OFF): lights B and
E are always switched off;
❒ pressed to the right (
): lights B
and E are always switched on.
29
The lights switch on/off gradually.
Switch C switches light B on/off.
Switch D switches light E on/off.
F1B0041C
23